Hi-Fi Speaker Cable – Discover Unique Insights..

Different speaker cable lengths – can it actually matter? In case you are at all interested in home theatre equipment then you will no doubt be aware that there exists a huge argument regarding how long the speaker cables between two or more speakers actually has to be. There’s a lot of misinformation around that has led many people to believe that the length of the Cayin Tube Amp needs to be kept identical, or at least almost identical, to prevent time delays and phase problems.

Do a quick search of any audio-visual forum or website and you will find that just about the most common questions is approximately differences in speaker cable lengths. It’s time and energy to settle this matter, which means this article aims to tell you why people think that they have to keep the duration of their speaker cables identical, and possibly most importantly, why the concept that cables have to be the identical length is really a total myth.

Lots of this is dependant on the makers who sell exotic speaker cables. Promoting the notion that all runs of cable need to be the same length helps the makers to produce a false feeling of knowledge of your eyes consumers, after all, the company that creates the cable is surely going to understand what they may be speaking about, and if they are saying that cable lengths should be identical then surely it should be true, right? Of course, it may also help the manufacturer to promote more cable because consumers will happily buy more cable compared to what they really need.

As with most myths about technology, once a few people have been told the Hi-Fi Speaker Cable needs to be the same length it soon becomes widespread and now you will discover people preaching this idea through the entire audio-visual community.

Let’s get this solved once and for all: differences in the length of your speaker cables doesn’t matter one bit. There is absolutely no good reason why the runs of cable between your speakers need to be kept to identical lengths. So why do so many individuals debate that there is certainly? Well it’s simply down to misinformation and misunderstanding.

The key argument to keep speaker cable runs the same length is that it really helps to avoid any delays or phase problems which may otherwise occur. Now, there is certainly actually some truth behind the notion that cable length could cause delays – obviously it will take slightly longer for any signal to travel along a cable that is a few hundred feet long compared with a cable which is just 2 or 3 feet long.

On the face from it you may be tempted to accept the argument that every speaker in your body should be fed with a cable which is the same length, that way you can be assured that your speakers get the signal at precisely the qzuqtl time and you will therefore avoid any delays or phase issues.

The problem with this particular argument though is that typical home theatre installations are on this kind of small scale that different lengths of speaker cable make virtually no impact whatsoever! In order for this to get relevant we would have to be coping with cables that were over 500 feet in size, and also then your differences in signal delay would certainly be unnoticeable to many people. That being the situation, there is absolutely no downside to using speaker cables of various lengths.

So next time someone tries to let you know that you need to maintain your runs of cable the same length you can ignore them! In reality typically it’s usually wise to keep Line Magnetic LM-210IA as short as you can, which certainly can make it much cheaper because you are only buying the amount of cable which you really need. Just be sure you keep the cable for long enough to travel around furniture, or around the edge of the area if necessary.

Leave a Reply

Your email address will not be published. Required fields are marked *

*